Clean Room Sticky Mat,water based concrete floor coating in
YJ-201 is a water-soluble, bi-component, amine-curing epoxy resin system. As a universal intermediate painting of water-based or oil-based epoxy floor, it can effectively improve the strength and flatness of the floor. Furthermore, combined with our water-based primer and water-based top coat, it can greatly reduce the occurrences of paint film bubbles caused by underground damp.
Concrete floor coating.
1. Applications.
Intermediate painting of the water-based or oil-based epoxy floor coatings.
2. Ground Treatments.
The ground shall be dry and clean, have a certain roughness, no loose substrates, non-grease or other debris. Use sand blasting machine, grinding machine and high pressure water gun to treat its surface if necessary.
3. Technical Data
| Component A | Component B | ||
Color | Light yellow brown liquid | Gray or green (color changeable ) | ||
Mixing Ratio by Weight | A:B=4:1 | |||
Application Time | 90min(15°C) | 40min(25°C) | 20min(35°C) | |
Recoat Time | 48h(15°C) | 24h(25°C) | 12h(35°C) | |
VOC contents | <2%(mixed) | |||
|
|
|
|
|
3.Package
25kg/set (including component A and component B)
Package:drums
25kg/set (including component A and component B) A:20kg/drum. B:5kg/drum
Clean Room Sticky Mat
Multi-layered clean-film full adhesive layers form mats that effectively capture dirt and dust from foot-traffic and equipment wheels before they enter controlled environments. Each of the numbered layers of the mat peels off easily to reveal a new clean surface. Sticky mats significantly reduce traffic-borne contaminants, removing up to 95% of particles at the .30 micron range. An acrylic adhesive is used which does not support microbial growth.